PRV AUDIO 2X TW400Ti Nd 4 v2 Bullet Super Tweeter 1 Exit Neodymium 120 Watts Max Power 4 Ohm 1 Inch Voice Coil New Version More Compact and Improve :B09J1R5XDY:Rean STORE
PRV AUDIO 2X TW400Ti Nd 4 v2 Bullet Super Tweeter 1 Exit Neodymium 120 Watts Max Power 4 Ohm 1 Inch Voice Coil New Version More Compact and Improve :B09J1R5XDY:Rean STORE
商品説明・詳細
送料・お届け
商品情報
ご注文確定後、海外拠点から日本へ発送いたしますのでお届けまでに5-10営業日(土日祝日除く)程度お時間を頂いております。税関での通関時に商品の開封検査を受けることがございますが、商品の品質に影響はございませんのでご安心ください。その他、商品に関するご不明点等はお気軽にお問い合わせください。無線機器等につきまして、日本国内で使用される場合電波法に違反する可能性がございますので十分ご注意ください。 商品説明 Shallow Profile - The motor has been re-designed to be more compact on its total mounting depth Shallow Profile - The motor has been re-designed to be more compact on its total mounting depth Improved Design - Featuring a new concept, easy to replace diaphragm ( solderless ) Designed for Efficiency - The titanium diaphragm combines with the durable, yet lightweight, Kapton voice coil former for sensitivity levels of up to 106 dB from 4,500 to 20,000 Hz. Power You Can Rely On - Up to 120 watts of power handling are on tap with a 12 dB/octave crossover at 6,000 Hz to keep up with the most demanding professional audio, high output home audio, and high SPL car audio systems Capacitor Included - A capacitor is included for protection from damaging frequencies at high power. Mounting hardware included. 説明: PRV Audio s TW400Ti-Nd-4 v2 (PAIR) super tweeter (also referred to as a bullet tweeter) is designed to add high output, high frequency response to any speaker system. The titanium diaphragm combines with the durable, yet lightweight, Kapton voice coil former for sensitivity levels of up to 106 dB from 4,500 to 20,000 Hz. Not only does this driver look as good as it sounds, but it is also able to take a ton of power! Up to 120 watts of power handling are on tap with a 12 dB/octave crossover at 6,000 Hz to keep up with the most demanding professional audio, high output home audio, and high SPL car audio systems. A capacitor is included for protection from damaging frequencies at high power. Mounting hardware included. New Evolution of our 1in exit neodymium bullet tweeters! Smaller Motor has been re-designed to be more compact on its total mounting depth. Improved Designed Featuring a new concept, easy to replace diaphragm (solderless) GENERAL SPECIFICATIONS Nominal impedance: 4 Ohms Rated AES Power Handling (RMS): 60 Watts Program Power: 120 Watts Sensitivity 2.00V at 1m: 106 dB Recommended Hi Pass Crossover*: 6000Hz** *For Full Power Handling **12db Per Octave Crossover Frequency Response at -10dB: 4,500 20,000 Hz Voice Coil Diameter: 1.0 (25.4 mm) Voice Coil Wire: Aluminum Voice Coil Former Material: Kapton Diaphragm Material: Titanium Flux Density: 1.45 T Magnet Material: Neodymium Overall Depth: 2.58 (65.5 mm) Mounting Depth: 1.51 (38.5 mm) Overall Diameter: 2.19 (55.7 mm) Cutout Diameter: 1.69 (43 mm) Net Weight: 0.72 lbs (0.33 kg) Each Unit Shipping Weight: 2.14 lbs (0.97 kg) Carton Dimensions W x L x H: 6.02 x 3.26 x 3.54 (153 x 83 x 90 mm) カテゴリー: スピーカー メーカー: PRV AUDIO ブランド: PRV AUDIO 高さ: 15.2 センチ 幅: 8.9 センチ 奥行: 8.3 センチ 重量: 0.7 Kg
ご注文確定後、海外拠点から日本へ発送いたしますのでお届けまでに5-10営業日(土日祝日除く)程度お時間を頂いております。税関での通関時に商品の開封検査を受けることがございますが、商品の品質に影響はございませんのでご安心ください。その他、商品に関するご不明点等はお気軽にお問い合わせください。無線機器等につきまして、日本国内で使用される場合電波法に違反する可能性がございますので十分ご注意ください。
商品説明
Shallow Profile - The motor has been re-designed to be more compact on its total mounting depth
Shallow Profile - The motor has been re-designed to be more compact on its total mounting depth
Improved Design - Featuring a new concept, easy to replace diaphragm ( solderless )
Designed for Efficiency - The titanium diaphragm combines with the durable, yet lightweight, Kapton voice coil former for sensitivity levels of up to 106 dB from 4,500 to 20,000 Hz.
Power You Can Rely On - Up to 120 watts of power handling are on tap with a 12 dB/octave crossover at 6,000 Hz to keep up with the most demanding professional audio, high output home audio, and high SPL car audio systems
Capacitor Included - A capacitor is included for protection from damaging frequencies at high power. Mounting hardware included.
説明:
PRV Audio s TW400Ti-Nd-4 v2 (PAIR) super tweeter (also referred to as a bullet tweeter) is designed to add high output, high frequency response to any speaker system. The titanium diaphragm combines with the durable, yet lightweight, Kapton voice coil former for sensitivity levels of up to 106 dB from 4,500 to 20,000 Hz.
Not only does this driver look as good as it sounds, but it is also able to take a ton of power! Up to 120 watts of power handling are on tap with a 12 dB/octave crossover at 6,000 Hz to keep up with the most demanding professional audio, high output home audio, and high SPL car audio systems. A capacitor is included for protection from damaging frequencies at high power. Mounting hardware included.
New Evolution of our 1in exit neodymium bullet tweeters!
Smaller Motor has been re-designed to be more compact on its total mounting depth.
Improved Designed Featuring a new concept, easy to replace diaphragm (solderless)
GENERAL SPECIFICATIONS
Nominal impedance: 4 Ohms
Rated AES Power Handling (RMS): 60 Watts
Program Power: 120 Watts
Sensitivity 2.00V at 1m: 106 dB
Recommended Hi Pass Crossover*: 6000Hz**
*For Full Power Handling **12db Per Octave Crossover
Frequency Response at -10dB: 4,500 20,000 Hz
Voice Coil Diameter: 1.0 (25.4 mm)
Voice Coil Wire: Aluminum
Voice Coil Former Material: Kapton
Diaphragm Material: Titanium
Flux Density: 1.45 T
Magnet Material: Neodymium
Overall Depth: 2.58 (65.5 mm)
Mounting Depth: 1.51 (38.5 mm)
Overall Diameter: 2.19 (55.7 mm)
Cutout Diameter: 1.69 (43 mm)
Net Weight: 0.72 lbs (0.33 kg) Each Unit
Shipping Weight: 2.14 lbs (0.97 kg)
Carton Dimensions W x L x H: 6.02 x 3.26 x 3.54
(153 x 83 x 90 mm)
カテゴリー: スピーカー
メーカー: PRV AUDIO
ブランド: PRV AUDIO
高さ: 15.2 センチ
幅: 8.9 センチ
奥行: 8.3 センチ
重量: 0.7 Kg